Friends, today let's talk about a rising star in the decoration industry - perforated aluminum veneer. This thing sounds quite high-end, but in fact, the aluminum plate has been punched, which has good appearance and practicality. Let's first talk about its aperture and punching rate, then discuss the installation method and precautions, and finally explore the difference between it and honeycomb aluminum plate.

What is the aperture of punched aluminum veneer

The aperture size of punched aluminum veneer depends on the specific design and purpose. The aperture range is between 0.5mm and 20mm, and some can even achieve finer details. The smaller the aperture, the more delicate it looks, but it is also necessary to consider factors such as ventilation and light transmission in practical applications.

How to calculate the punching rate of perforated aluminum veneer

Punching rate refers to the percentage of the total area of holes to the total area of the aluminum plate. The calculation formula is: punching rate=(total area of holes/total area of aluminum plate) × 100%. This value has a significant impact on the performance of aluminum veneer, and punching rates between 10% and 30% are quite common.

Now let's talk about the installation method of punched aluminum plates and what to pay attention to during installation.

What are the precautions for installing punched aluminum panels

There are two main installation methods for punched aluminum plates: dry hanging method and wet hanging method. Dry hanging method is suitable for indoor and outdoor decoration, with fast installation speed and convenient construction; The wet hanging rule is suitable for outdoor use and has strong wind resistance. Attention should be paid during installation:

1. Ensure that the base is flat, clean, and free of oil stains, water stains, etc.

2. The installation sequence of aluminum plates should be from top to bottom to avoid deformation during the installation process.

3. The hook should be firm to avoid the aluminum plate falling off due to loose hooks.

After installation, check whether the aluminum plate is flat and whether the holes are aligned.

Let's take a look at the difference between punched aluminum veneer and honeycomb aluminum panel, and whether aluminum honeycomb panel can be punched.

What is the difference between perforated aluminum veneer and honeycomb aluminum sheet? Can aluminum honeycomb sheet be punched

The main difference between punched aluminum veneer and honeycomb aluminum sheet lies in their material and structure. Punched aluminum veneer is a single-layer aluminum plate, while honeycomb aluminum plate is an aluminum honeycomb core with a surface aluminum plate. Honeycomb aluminum plate has better compressive and bending resistance due to its unique structure.

As for whether aluminum honeycomb panels can be punched, the answer is yes. However, it should be noted that punching will affect the strength and stability of the honeycomb aluminum plate, so this should be considered in the design.

Punched aluminum veneer, as a new type of decorative material, has both fashionable appearance and practical performance. During installation and use, we need to pay attention to the aperture, punching rate, installation method, and precautions in order to maximize its value. I hope this article can help you avoid taking detours when decorating. Hey Decoration Business, let's work together!