Ladies and gentlemen, today let's talk about the versatile, lightweight and fashionable building material - perforated aluminum veneer! This thing is quite famous in the construction industry. If you don't believe it, take a look at those skyscrapers and high-end office buildings, which one doesn't have a trace of it?

Firstly, let's talk about the installation method of punched aluminum plates. This is not as simple as just posting it casually, it requires skill. First, you need to prepare the corresponding tools, such as drills, screws, wrenches, etc. During installation, it is necessary to ensure that the gap between the aluminum veneer and the wall or keel is moderate, neither too large nor too small. We need to take it slow, step by step, to ensure a secure and aesthetically pleasing installation.

Installation method of punched aluminum plate

Before installing perforated aluminum veneer, ensure that the wall surface is flat and free of debris. First, use a spirit level to check the verticality of the wall. If there is any deviation, it needs to be corrected. According to the design drawings, mark the installation position on the wall with a pencil. Use an electric drill to drill holes at the marked location, with a diameter slightly larger than the screw diameter. Use a wrench to screw the screws into the holes and install the aluminum veneer. Tighten the screws with a wrench to ensure that the aluminum veneer is securely installed.

What are the precautions for installing punched aluminum veneer

When installing punched aluminum veneer, the following points should be noted: 1 Avoid installing in damp environments to avoid affecting the performance of aluminum veneer; During the installation process, do not apply excessive force to avoid damaging the aluminum veneer; 3. After the installation of aluminum veneer, the surface should be cleaned of dust and stains in a timely manner; 4. There is a protective film on the surface of the aluminum veneer, which needs to be removed after installation.

Let's talk about the aperture and punching rate of punched aluminum veneer. These two parameters are crucial for the aesthetics and performance of aluminum veneer. The aperture size should be determined according to design requirements. The larger the aperture, the lighter the aluminum veneer and the better the visual effect. And the punching rate is the ratio of the area occupied by the holes to the total area. This ratio should be determined according to the application scenarios of aluminum veneer, such as indoor partitions, and the punching rate can be slightly lower; For outdoor decoration, the punching rate should be higher to achieve better transparency and breathability.

What is the aperture of perforated aluminum plate? How to calculate the punching rate of perforated aluminum veneer

The aperture of punched aluminum veneer is usually between 1-10 millimeters, depending on design requirements and practical applications. The calculation formula for punching rate is: hole area/total area. A hole of 100 square millimeters has a punching rate of 10% on an aluminum veneer of 1000 square millimeters.

Let's talk about punched aluminum veneer itself. This thing is made of aluminum plate through punching process, which has the characteristics of lightweight, corrosion resistance, and easy installation. It is widely used in the fields of building exterior walls, indoor partitions, ceilings, etc., and is a leader in modern building decoration materials.

Punched aluminum veneer is a versatile and practical building material. Whether it is the installation method, aperture, punching rate and other parameters, they must be determined according to actual needs. When choosing perforated aluminum veneer, attention should also be paid to factors such as brand and quality to avoid affecting the use effect.

Speaking of which, the application scenario of this punched aluminum veneer is really impressive. In the office, using it as a partition can not only divide the space, but also maintain good ventilation and lighting; In home decoration, using it as a ceiling can not only beautify the space but also reflect personality.

Punched aluminum veneer, a building material, is becoming increasingly popular among people. It not only satisfies our pursuit of aesthetics, but also brings many practical benefits. Perhaps in the near future, it will become a new favorite in the field of architecture, leading the development trend of the building materials industry. Hey guys, what do you think? 🤔🤔🤔