Hey， Dear decoration experts, today let's talk about a super fashionable building material - punched aluminum veneer! This kind of thing not only has a high aesthetic value, but also is not complicated to install, making it a perfect match for modern architecture and interior decoration.

Installation method of punched aluminum plate

Firstly, let's talk about the installation method. The installation of punched aluminum veneer is actually quite simple, and the key is to master several steps:

1. Measurement and cutting: Firstly, the aluminum plate must be measured and cut according to the on-site dimensions. This step should be precise and not careless.

2. Positioning and fixation: Next is positioning, ensuring that the position of each board is accurate and correct. When fixing, use screws to fix it on the keel, remember to be firm.

3. Connection and sealing: Finally, connection and sealing should be done by sealing the joint with sealant to ensure that there is no air or rain leakage.

What are the precautions for installing punched aluminum veneer?

What are the precautions for installing punched aluminum veneer

When installing punched aluminum veneer, there are a few small details that need special attention:

-Surface treatment: Before installation, ensure that the surface of the aluminum plate is clean and free from oil stains or dust.

-Keel selection: The selection of keels is also crucial, and it is important to choose suitable keels to ensure installation stability.

-Construction environment: During installation, it is necessary to ensure that the environment on the construction site is suitable, such as temperature, humidity, etc., to avoid affecting the installation quality.

Specification, dimensions, and thickness of punched aluminum veneer

The specifications and dimensions of punched aluminum veneer are also very particular. Its thickness comes in 1.5mm, 2.0mm, 2.5mm, etc., and the specific selection depends on actual needs.

Specification, dimensions, and thickness of punched aluminum veneer

-Specification and size: There are various specifications and sizes for punched aluminum veneer, commonly including 1220mm × 2440mm, 1500mm × 3000mm, etc.

-Thickness selection: The thickness selection should be based on the load-bearing requirements and aesthetic needs. Generally, it is advisable to use a thickness of 2.0mm or more for the exterior walls of buildings.

What is the difference between perforated aluminum veneer and honeycomb aluminum sheet? Can aluminum honeycomb sheet be punched

When it comes to punched aluminum veneer, honeycomb aluminum sheet cannot be ignored. What is the difference between these two? Honeycomb aluminum plate is made using aluminum honeycomb core material, while punched aluminum veneer is only punched on the aluminum plate.

What is the difference between perforated aluminum veneer and honeycomb aluminum sheet? Can aluminum honeycomb sheet be punched

-Difference: Honeycomb aluminum panels have higher strength and better sound and heat insulation performance, while punched aluminum veneers focus more on decorative effects.

-Honeycomb aluminum plate punching: In theory, aluminum honeycomb plates can also be punched, but it should be noted that punching may affect their original performance.

What is the aperture of perforated aluminum veneer? How to calculate the punching rate of perforated aluminum veneer

The aperture size of punched aluminum veneer is also a subject of study. The aperture can be 3mm, 6mm, 10mm, etc., and the specific aperture should be determined according to the design requirements.

What is the aperture of perforated aluminum veneer? How to calculate the punching rate of perforated aluminum veneer

-Aperture size: The size of the aperture will affect the aesthetics and functionality of aluminum veneer, and should be considered comprehensively when selecting.

-Punching rate calculation: Punching rate refers to the ratio of the total area of the aperture to the total area of the aluminum plate. The calculation formula is: Punching rate=total area of the aperture/total area of the aluminum plate.

Punched aluminum veneer is a very practical and beautiful material, suitable for various buildings and interior decorations. Mastering installation methods, specifications, dimensions, differences, and punching rates can make your decoration more perfect. After saying so much, do you feel that punched aluminum veneer is closer to you? 🤗